* Handle window/showMessage and display it bellow status line
* Enable `editor.lsp.display_messages` by default
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
The only caller of `from_path_buf` was removed in the parent commit
allowing us to drop owned variant of path's `Cow`. With this change we
never need to allocate in the picker preview callback.
The lsp location type has the lsp's URI type and a range. We can replace
that with a custom type private to the lsp commands module that uses the
core URI type instead.
We can't entirely replace the type with a new Location type in core.
That type might look like:
pub struct Location {
uri: crate::Uri,
range: crate::Range,
}
But we can't convert every `lsp::Location` to this type because for
definitions, references and diagnostics language servers send documents
which we haven't opened yet, so we don't have the information to convert
an `lsp::Range` (line+col) to a `helix_core::Range` (char indexing).
This cleans up the picker definitions in this file so that they can all
use helpers like `jump_to_location` and `location_to_file_location` for
the picker preview. It also removes the only use of the deprecated
`PathOrId::from_path_buf` function, allowing us to drop the owned
variant of that type in the child commit.
This is a temporary limitation because of the way that command sequences
are executed. Each command is currently executed back-to-back
synchronously, but macros are by design queued up for the compositor.
So macros mixed into a command sequence will behave undesirably: they
will be executed after the rest of the static and/or typable commands
in the sequence.
This is pending a larger refactor of how we handle commands.
<https://redirect.github.com/helix-editor/helix/issues/5555> has
further details and <https://redirect.github.com/helix-editor/helix/issues/4508>
discusses a similar problem faced by the command palette.
* refactor(commands): output `stderr` in `:sh` popup
* refactor(commands): switch to `from_utf8_lossy`
This way something is always displayed.
* refactor: no longer log stderr output on failure
* feat: pertty header
* 更新 themes.md
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
In the case of network file systems, if the server time is ahead
of the local system time, then helix could annoy with messages
that the file has already been modified by another application.
* replicate t-monaghan's changes
* remove View.offset in favour of Document.view_data.view_position
* improve access patterns for Document.view_data
* better borrow checker wrangling with doc_mut!()
* reintroduce ensure_cursor_in_view in handle_config_events
since we sorted out the borrow checker issues using partial borrows,
there's nothing stopping us from going back to the simpler implementation
* introduce helper functions on Document .view_offset, set_view_offset
* fix rebase breakage
Pastes are probably the last edit one means to make before the query
should run so it doesn't need to be debounced.
This makes global search much snappier for example when accepting the
history suggestion from the '/' register or pasting a pattern from the
clipboard or a register.
Two changes from the parent commit:
* Save only the `Picker::primary_query` - so you don't save other parts
of the query, for example `%path foo.rs` while in `global_search`.
* Move the saving out of the `if let Some(option) = self.selection()`
block. So when you hit enter you save to history whether you have a
selection or not. If you want to close the picker without saving to
the register you can use C-c or Esc instead.
The Prompt is set up to push the current line to history when hitting
Enter but the Picker doesn't pass the Enter event down to the Prompt
(for good reason: we don't want the Prompt's behavior of changing
completions when we hit a path separator). We should save the Prompt's
line to its configured history register when hitting Enter when there
is a selection in the Picker.
This currently only applies to `global_search`'s Picker since it's the
only Picker to use `Picker::with_history_register`.
This commit brings the text decoration API inline with the
LineAnnotation API (so they are consistent) resulting in a single
streamlined API instead of multiple ADHOK callbacks.
We can track the ranges in the input text that correspond to each column
and use this information during rendering to apply a new theme key that
makes the "active column" stand out. This makes it easier to tell at
a glance which column you're entering.
`Picker::new` loops through the input options to inject each of them, so
there's no need to collect into an intermediary Vec. This removes some
unnecessary collections. Also, pickers that start with no initial
options can now pass an empty slice instead of an empty Vec.
Co-authored-by: Luis Useche <useche@gmail.com>
The `FileLocation` and `PathOrId` types can borrow paths rather than
requiring them to be owned. This takes a refactor of the preview
functions and preview internals within `Picker`. With this change we
avoid an unnecessary `PathBuf` clone per render for any picker with a
file preview function (i.e. most pickers).
This refactor is not fully complete. The `PathOrId` is _sometimes_ an
owned `PathBuf`. This is for pragmatic reasons rather than technical
ones. We need a further refactor to introduce more core types like
`Location` in order to eliminate the Cow and only use `&Path`s within
`PathOrId`. This is left for future work as it will be a larger refactor
almost entirely fitting into the LSP commands module and helix-core -
i.e. mostly unrelated to refactoring the `Picker` code itself.
Co-authored-by: Pascal Kuthe <pascalkuthe@pm.me>
This introduces a custom URI type in core meant to be extended later
if we want to support other schemes. For now it's just a wrapper over a
PathBuf. We use this new URI type to firewall `lsp::Url`. This was
previously done in 8141a4a but using a custom URI type is more flexible
and will improve the way Pickers handle paths for previews in the child
commit(s).
Co-authored-by: soqb <cb.setho@gmail.com>
This fixes the changed files picker when used against a clean worktree
for example. Without it the running indicator does not disappear. It
also simplifies the dynamic query handler's implementation so that it
doesn't need to request a redraw explicitly.
Co-authored-by: Pascal Kuthe <pascalkuthe@pm.me>
We could expand on this in the future to have different preview modes
that you can toggle between with C-t. Currently that binding just hides
the preview but it could switch between different preview modes and in
one mode hide the path and just show the line contents.
The parent commit split out the workspace symbol picker to an inline
definition so the `workspace` parameter is never passed as `true`. We
should consolidate this picker definition into the symbol_picker
function.
DynamicPicker is a thin wrapper over Picker that holds some additional
state, similar to the old FilePicker type. Like with FilePicker, we want
to fold the two types together, having Picker optionally hold that
extra state.
The DynamicPicker is a little more complicated than FilePicker was
though - it holds a query callback and current query string in state and
provides some debounce for queries using the IdleTimeout event.
We can move all of that state and debounce logic into an AsyncHook
implementation, introduced here as `DynamicQueryHandler`. The hook
receives updates to the primary query and debounces those events so
that once a query has been idle for a short time (275ms) we re-run
the query.
A standard Picker created through `new` for example can be promoted into
a Dynamic picker by chaining the new `with_dynamic_query` function, very
similar to FilePicker's replacement `with_preview`.
The workspace symbol picker has been migrated to the new way of writing
dynamic pickers as an example. The child commit will promote global
search into a dynamic Picker as well.
We will use this in the child commit to improve the picker's running
indicator. Nucleo 0.4.0 includes an `active_injectors` member that we
can use to detect if anything can push to the picker. When that count
drops to zero we can remove the running indicator.
Nucleo 0.4.1 contains a fix for crashes with interactive global search
on a large directory.
This works nicely for dynamic pickers: we stop any running jobs like
global search that are pushing to the injector by incrementing the
version number when we start a new request. The boolean only allowed
us to shut the picker down once, but with a usize a picker can have
multiple "sessions" / "life-cycles" where it receives new options
from an injector.
Now that the picker is defined as a table, we need a way to provide
input for each field in the picker. We introduce a small query syntax
that supports multiple columns without being too verbose. Fields are
specified as `%field pattern`. The default column for a picker doesn't
need the `%field` prefix. The field name may be selected by a prefix
of the field, for example `%p foo.rs` rather than `%path foo.rs`.
Co-authored-by: ItsEthra <107059409+ItsEthra@users.noreply.github.com>
`menu::Item` is replaced with column configurations for each picker
which control how a column is displayed and whether it is passed to
nucleo for filtering. (This is used for dynamic pickers so that we can
filter those items with the dynamic picker callback rather than nucleo.)
The picker has a new lucene-like syntax that can be used to filter the
picker only on certain criteria. If a filter is not specified, the text
in the prompt applies to the picker's configured "primary" column.
Adding column configurations for each picker is left for the child
commit.
The picker previously used the IdleTimeout event as a trigger for
syntax-highlighting the currently selected document in the preview pane.
This is a bit ad-hoc now that the event system has landed and we can
refactor towards an AsyncHook (like those used for LSP completion and
signature-help). This should resolve some odd scenarios where the
preview did not highlight because of a race between the idle timeout
and items appearing in the picker.
This fixes the modification indicator when saving from insert mode with
a config such as
[keys.insert]
C-s = ":write"
Previously the modification indicator would be stuck showing modified
even if the buffer contents matched the disk contents when writing after
some changes in insert mode with this binding. In insert mode we do not
eagerly write undo checkpoints so that all changes made become one
checkpoint as you exit insert mode. When saving, `Document`s `changes`
`ChangeSet` would be non-empty and when there are changes we show the
buffer as modified. Then switching to normal mode would append the
changes to history, bumping the current revision past what it was when
last saved. Since the last saved revision and current revision were then
unsynced, the modification indicator would always show modified.
This matches [Kakoune's behavior]. Kakoune has a different architecture
for writes but a very similar system for history, transactions and undo
checkpoints (what it calls "undo groups"). Upon saving Kakoune creates
an undo checkpoint if there are any uncommitted changes. It does this
after the write has gone through since its writing system is different.
For our writing system it's cleaner to make the undo checkpoint before
performing the save so that the history revision increments before we
send the save event.
[Kakoune's behavior]: 80fcfebca8/src/buffer.cc (L565-L566)
Previously `gf` on `~/.config/helix` for example would error if the
entire path was selected but succeed and open a picker for the directory
contents if the selection was one one-width cursor. We need to expand
tildes for all paths instead of just the auto-detected paths.
This also refactors the `goto_file` blocks a little so that we construct
`paths` once instead of creating the Vec and immediately clearing it
when the selection is one single-width cursor.
This fix allows for multiple language servers at once which support
workspace commands. This was previously broken as just the first
language server supporting workspace commands was queried when listing
allowed worspace commands.
The fix is in two parts. Firstly, querying all workspace commands from
all language servers available and using them when actually running the
command in `lsp_workspace_command`. Secondly, doing the same in
`completers::lsp_workspace_command` such that completion still works as
expected.
The fix has one remaining issue, which I am unsure how to handle in the
best way possible, but which I also don't think should happen often:
Multiple language servers may register commands with the same name. This
will lead to that command being listed in the popup menu and in the
completion list multiple times, which can be possibly confusing. One
could disambigue them in the popover menu, but I am not sure the same
can be done for completion. When running `lsp-workspace-command` with
parameters, this behavior is "fixed" by displaying an error in that
case. I am unsure if this is the best fix for this issue in that case,
but could not find a better one.
Saving while in insert mode causes issues with the modification
indicator and this is very easy to reproduce with the current state of
the auto-save hook. We can tweak the hook slightly to await the mode
switch out of insert mode to perform the save.
The debounce is preserved: if you save and then immediately exit insert
mode the debounce will be respected. If the debounce lapses while you
are in insert mode, the save occurs as you switch out of insert mode
immediately.
* Implement check before adding path to files
* fix problem where directories were removed from args.files
* Revert "Implement check before adding path to files"
This reverts commit c123944d9b.
* Dissallow opening of irregular non-symlink files
* Fixed issue with creating new file from command line
* Fixed linting error.
* Optimized regularity check as suggested in review
* Created DocumentOpenError Sum Type to switch on in Application
* Forgot cargo fmt
* Update helix-term/src/application.rs
Accept suggestion in review.
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Moved thiserror version configuration to the workspace instead of the individual packages.
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* auto save after delay
* configable
* clearer names
* init
* working with some odd behaviour
* working with greater consistency
* Apply reviewer suggestions
- Remove unneccessary field
- Remove blocking save
* Improve auto-save configuration
Auto save can be configured to trigger on focus loss:
```toml
auto-save.focus-lost = true|false
```
and after a time delay (in milli seconds) since last keypress:
```toml
auto-save.after-delay.enable = true|false
auto-save.after-delay.timeout = [0, u64::MAX] # default: 3000
```
* Remove boilerplate and unnecessary types
* Remove more useless types
* Update docs for auto-save.after-delay
* Fix wording of (doc) comments relating to auto-save
* book: Move auto-save descriptions to separate section
---------
Co-authored-by: Miguel Perez <miguelvojito@gmail.com>
Co-authored-by: Miguel Perez <perezoji@cs.fsu.edu>
* Remove special-casing of line ending characters in selection replacement
* Refactor line ending handling and integration test to address code review comments
This is useful for resetting multiple changes at once. For example you
might use 'maf' or even '%' to select a larger region and reset all
changes within.
The original behavior of resetting the change on the current line is
retained when the primary selection is 1-width since we look for chunks
in the line range of each selection.
It can be convenient to define project specific debugger templates, some of
which might not necessitate prompting the user to define completion.
This commit makes completion optional for debugger templates and starts the
dap immediately if undefined or empty.
some LSPs does update the active signature and some not. To make both
worlds happy, make the active signature more intelligent.
1. SignatureHelp store now the suggested lsp_signature
2. if the lsp_signature changes then use it
3. otherwise use the last signature from the old popup
4. in case the old signature doesn't exist anymore, show the last signature
Signed-off-by: Ben Fekih, Hichem <hichem.f@live.de>
Trunctation should always be handled by the parent. Returning None is
only supposed to indicate a missing implementation
Co-authored-by: Ben Fekih, Hichem" <hichem.f@live.de>
While moving completion resolve to the event system in #9668 we introduced what
is essentially a "DOS attack" on slow LSPs. Completion resolve requests were
made in the render loop and debounced with a timeout. Once the timeout expired
the resolve request was made. The problem is the next frame would immediately
request a new completion resolve request (and mark the old one as obsolete but
because LSP has no notion of cancelation the server would still process it). So
we were in essence sending one completion request to the server every 150ms and
only stopped if the server managed to respond before we rendered a new frame.
This caused overload on slower machines/with slower LS.
In this PR I revamped the resolve handler so that a request is only ever
resolved once. Both by checking if a request is already in-flight and by marking
failed resolve requests as resolved.
Make the popup positions more consistent.
Improvements:
1. if the signature popup content is bigger than the available space,
then the popup is always shown under the cursor, even if there more
space above the cursor than below
2. There is no mutation anymore inside required_size. Maybe in the future
we can update all widgets to have no mutations and change the trait
Signed-off-by: Ben Fekih, Hichem <hichem.f@live.de>
Currently the editor mode has no effect on the behavior of `search` and
`rsearch`. We can pass in the right movement for the editor mode to make
the behavior or `search` and `rsearch` match `search_next` and
`search_prev` in select mode.
implement handle_event to cycle through the function signatures.
To change the signature press alt+p/n .
Signed-off-by: Ben Fekih, Hichem <hichem.f@live.de>
when the available height for the popup is low/small, then it is not
possible to scroll until the end
Signed-off-by: Ben Fekih, Hichem <hichem.f@live.de>
Previously unnecessary/deprecated diagnostic tags replaced the highlight
for the severity of a diagnostic. This could cause either the severity
or unnecessary/deprecated scopes to disappear when diagnostic ranges
overlapped though. Plus the severity highlight can be interesting in
addition to the unnecessary/deprecated highlight.
So this change separates the unnecessary and deprecated highlights from
the severity highlights, so each is merged separately and when they
overlap, the highlights are combined.
This reverts commit 0dc67ff885.
See the post-merge discussion in #9828. The old behavior was less
surprising and we have other ways to abort from a prompt, so let's
revert the behavior change.
This uses the new TreeCursor type from the parent commit to reimplement
the tree-sitter motions (`A-p/o/i/n`). Other tree-sitter related
features like textobjects are not touched with this change and will
need a different, unrelated approach to solve.
The refactor in bcf7b263 introduced a possible subtraction with overflow
when the statusline is layed out so that the left or right sides are
larger than the padding it would take to align the center area to the
middle.
When the left or right areas are too large, we can evenly space the
elements rather than trying to align the center area to the middle.
This prevents possible underflows and makes sense visually - it's
still easy to tell the areas apart at a glance.
The `shell_impl` and `shell_impl_async` functions no longer return
`success` because it was always `true`. If the command didn't succeed
both functions would return an `Err`.
This was also the reason, why `shell_keep_pipe` didn't work. It relied
upon the value of `success` and aborted in case of an `Err`.
It now removes any selection for which `shell_impl` returns `Err`.
If the command always fails, the selections are preserved and an error
message is displayed in the status bar.
In the `reload-all` command, we should not stop reloading the documents
if one error is found. Instead, we should report the error and continue
trying to reload the current open documents. This is useful in cases
where a backing file does not exist temporarily (e.g. when editing a git
patch in the outstanding chain that doesn't have a file just yet).
This change also remove the error messages in the cases where the
backing is `None`, like in new docs or `tutor`.
* feat: add 'file-abs-path' to statusline (#4434)
* cleanup implementation
* rename to be non-abbreviated names
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* implement another selection modifying command
* Selection feels more ergonomic in case of swapping the direction. This also fixes a problem when starting at an empty line.
* rename select_line_up/down to select_line_above/below
* apply clippy suggestion of using cmp instead of if-chain
* revert `Extent` implementing `Clone/Copy`
* move select_line functions below extend_line implementations
* implement help add function, which saturates at the number of text lines
---------
Co-authored-by: Emi <emanuel.boehm@gmail.com>
Test Document
-------------
```
{{
}
}
```
Steps To Reproduce
------------------
1. 2j # move_visual_line_down
1. C # copy_selection_on_next_line
1. mdm # surround_delete
Debug
-----
`assertion failed: last <= from', transaction.rs:597:13`
Release
-------
`called `Result::unwrap()` on an `Err` value: Char range out of bounds:
char range 18446744073709551614..18446744073709551615,
Rope/RopeSlice char length 7', ropey-1.6.1/src/rope.rs:546:37`
Description
-----------
Processing the surrounding pairs in order violates the assertion the
ranges are ordered. To handle nested surrounds all positions have to
be sorted. Also surround_replace has to track the proper replacement
character for each position.
Joining lines with Alt-J does not properly select the inserted spaces
when the selection contains blank lines. In the worst case it panics
with an out of bounds index.
thread 'main' panicked at 'called `Result::unwrap()` on an `Err` value:
Char index out of bounds: char index 11, Rope/RopeSlice char length 10'
Steps to reproduce:
* Create a new document
```
a
b
c
d
e
```
* % (Select all)
* Alt-J (join and select the spaces)
URIs need to be normalized to be comparable. For example a language
server could send a URI for a path containing '+' as '%2B' but we might
encode this in something like 'Document::url' as just '+'. We can
normalize the URI straight into a PathBuf though since this is the only
value we compare these diagnostics URIs against. This also covers
edge-cases like windows drive letter capitalization.
* Use next and avoid a redundant prefix strip
* Avoid allocations
Especially when `expand_tilde` is claled on a path
that doesn't contain a tilde.
* Add a test
* Use Into<Cow<…>>
* Put the expand_tilde test at the end of the file
* Remove unused importsw
Previously we used the IdleTimeout event to trigger LSP
`completion/resolveItem` requests. We can now refactor this to use an
event system hook instead and lower the timeout.
* neovim like scroll function
* clear line annotations outside of move_vertically/_visual
* add nvim scroll function to commands
* assign nvim-scroll to C-d and C-u (half page scrolls)
* dont remove backspace and space mapping
* move non-softwrap logic to seperate function, call this in nvim-scroll fn
* Revert "move non-softwrap logic to seperate function, call this in nvim-scroll fn"
This reverts commit e4905729c3.
* Revert "clear line annotations outside of move_vertically/_visual"
This reverts commit 1df3fefe55.
* add TODO for when inline diagnostics gets merged
* move nvim-scroll logic into scroll(), dont respect scrolloff
* run cargo fmt
* run cargo clippy
* update documenation for Ctrl-d and Ctrl-u remap
* Make sure pending key list is empty when count handling
This will allow using numbers as second key event.
* count handling; add an exception for 'g'
* Lookup the key event before considering a number as count
* Avoid the allocation of another vec for the pending keys
---------
Co-authored-by: x <x@torrent>
`syn_loader` was replaced rather than interior value being replace,
old value was still being referenced and not updated after `:config-refresh`.
By using `ArcSwap` like for `config`, each `.load()` call will return the most
updated value.
Co-authored-by: kyfan <kyfan@email>
* Replace FileType::Suffix with FileType::Glob
Suffix is rather limited and cannot be used to match files which have
semantic meaning based on location + file type (for example, Github
Action workflow files). This patch adds support for a Glob FileType to
replace Suffix, which encompasses the existing behavior & adds
additional file matching functionality.
Globs are standard Unix-style path globs, which are matched against the
absolute path of the file. If the configured glob for a language is a
relative glob (that is, it isn't an absolute path or already starts with
a glob pattern), a glob pattern will be prepended to allow matching
relative paths from any directory.
The order of file type matching is also updated to first match on globs
and then on extension. This is necessary as most cases where
glob-matching is useful will have already been matched by an extension
if glob matching is done last.
* Convert file-types suffixes to globs
* Use globs for filename matching
Trying to match the file-type raw strings against both filename and
extension leads to files with the same name as the extension having the
incorrect syntax.
* Match dockerfiles with suffixes
It's common practice to add a suffix to dockerfiles based on their
context, e.g. `Dockerfile.dev`, `Dockerfile.prod`, etc.
* Make env filetype matching more generic
Match on `.env` or any `.env.*` files.
* Update docs
* Use GlobSet to match all file type globs at once
* Update todo.txt glob patterns
* Consolidate language Configuration and Loader creation
This is a refactor that improves the error handling for creating
the `helix_core::syntax::Loader` from the default and user language
configuration.
* Fix integration tests
* Add additional starlark file-type glob
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
Currently, helix implements operations which change the paths of files
incorrectly and inconsistently. This PR ensures that we do the following
whenever a buffer is renamed (`:move` and workspace edits)
* always send did_open/did_close notifications
* send will_rename/did_rename requests correctly
* send them to all LSP servers not just those that are active for a
buffer
* also send these requests for paths that are not yet open in a buffer (if
triggered from workspace edit).
* only send these if the server registered interests in the path
* autodetect language, indent, line ending, ..
This PR also centralizes the infrastructure for path setting and
therefore `:w <path>` benefits from similar fixed (but without didRename)
We use `which::which` in many crates, so `which` was a separate
dependency across all of them. We can centralize `which` into the
stdx crate so it's easy for all crates to depend on it.
I also moved the rest of `helix-view/src/env.rs` into helix-stdx's
`env` module since it only contained a thin wrapper around `which`
and `std::env`.
helix-stdx is meant to carry extensions to the stdlib or low-level
dependencies that are useful in all other crates. This commit starts
with all of the path functions from helix-core and the CWD tracking that
lived in helix-loader.
The CWD tracking in helix-loader was previously unable to call the
canonicalization functions in helix-core. Switching to our custom
canonicalization code should make no noticeable difference though
since `std::env::current_dir` returns a canonicalized path with
symlinks resolved (at least on unix).
* feat(lsp): implement show document request
Implement [window.showDocument](https://microsoft.github.io/language-server-protocol/specifications/lsp/3.17/specification/#window_showDocument)
LSP server-sent request.
This PR builds on top of helix-editor#5820,
moves the external-URL opening functionality into shared crate-level
function that returns a callback that is now used by both the
`open_file` command as well as the window.showDocument handler if
the URL is marked as external.
* add return
* use vertical split
* refactor
---------
Co-authored-by: Michael Davis <mcarsondavis@gmail.com>
* Keep lsp event listener thread alive when malformed json is encountered from the lsp server
* Update unexpected error flow in recv() to close outstanding requests and close the language server
* Log malformed notifications as info instead of error
* Make close_language_server a nested function inside recv, similar to what's done in send
* Update malformed notification log text
* Clean up new log text a bit
* Initialize recv_buffer closer to where it's used
* Use "exit" instead of "close"
* Remove whitespace
* Remove the need for a helper method to exit the language server
* Match on Unhandled error explicitly and keep catch-all error case around
`:tree-sitter-subtree` could previously only print subtrees of nodes
in the root injection layer. We can improve on that by finding the layer
that contains the given byte range and printing the subtree within that
layer. That gives more useful results when a selection is within an
injection layer.
Make the pluralization of files and selections consistent to emphasize
the 1-to-1 relation between files and selections. The prior wording
with plural "files" and singular "selection" can mislead users into
thinking the command can open multiple files from a single selection.
Diagnostics are currently extended if text is inserted at their end. This is
desirable when inserting text after an identifier. For example consider:
let foo = 2;
--- unused variable
Renaming the identifier should extend the diagnostic:
let foobar = 2;
------ unused variable
This is currently implemented in helix but as a consequence adding whitespaces
or a type hint also extends the diagnostic:
let foo = 2;
-------- unused variable
let foo: Bar = 2;
-------- unused variable
In these cases the diagnostic should remain unchanged:
let foo = 2;
--- unused variable
let foo: Bar = 2;
--- unused variable
As a heuristic helix will now only extend diagnostics that end on a word char
if new chars are appended to the word (so not for punctuation/ whitespace).
The idea for this mapping was inspired for the word level tracking vscode uses
for many positions. While VSCode doesn't currently update diagnostics after
receiving publishDiagnostic it does use this system for inlay hints for example.
Similarly, the new association mechanism implemented here can be used for word
level tracking of inlay hints.
A similar mapping function is implemented for word starts. Together
these can be used to make a diagnostic stick to a word. If that word
is removed that diagnostic is automatically removed too. This is the exact
same behavior VSCode inlay hints eixibit.
* fix: #8977
fixes the issue that lines with only spaces are getting
joined as well
* reverting some renamings
* improve empty line check
* adding integration test
* reverting code block
* fix conditon check for line end
* applying suggested style
* rust-toolchain.toml: bump MSRV to 1.70.0
With Firefox 120 released on 21 November 2023, the MSRV is now 1.70.0.
* Fix cargo fmt with Rust 1.70.0
* Fix cargo clippy with Rust 1.70.0
* Fix cargo doc with Rust 1.70.0
* rust-toolchain.toml: add clippy component
* .github: bump dtolnay/rust-toolchain to 1.70
* helix-term: bump rust-version to 1.70
* helix-view/gutter: use checked_ilog10 to count digits
* helix-core/syntax: use MAIN_SEPARATOR_STR constant
* helix-view/handlers/dap: use Display impl for displaying process spawn error
* WIP: helix-term/commands: use checked math to assert ranges cannot overlap
* Resolve args.files before changing directory
* Removed the open_cwd work-around now that the path is full
* If -w is specified, use that as the working directory
* Open the remaining files in the argument list, also when the first is a directory
* Use an iterator access the files argument
* Add support for showing all LSPs in --health <lang>
* Add support for showing all LSPs in --health languages
* Use available/configured in --health languages
* Apply @AlexanderBrevig suggestion in --health
* Update `--health <language>`
Better output (inspired by #8156).
Handle the case where no LSPs are configured.
* Display all LSPs in `--health languages` instead of x/x
Displays all LSPs as a list in the table generated wih `--health languages`
* Make check_binary accept Optional references to str
Avoids some calls to .clone()
* Apply @the-mikedavis suggestions
* Avoid useless collecting and cloning
* Use for loop instead of .try_for_each()
* Accept +num flag for opening at line number
* Update +N argument feature according to feedback in original PR #5603
* Only override the line number of the first file if +N is specified
---------
Co-authored-by: Nachum Barcohen <38861757+nabaco@users.noreply.github.com>
* added working path arg to cli and help menu
* improve working path cli arg handling
* enable hx to set the working path
* applied cargo formatting
* improved code from cargo clippy suggestion
* improved code from follow up review
* fix for -w <path> is set but args.files is empty
* improved formatting of --help output
rhogenson
Ayoub Benali
Michael Davis
RoloEdits
Jefta
André Carneiro
麦芽糖
Pascal Kuthe
Nikolay Minaev
Ingrid
Trevor Gross
jyn
arcofx
Schmiddiii
Thomas Schafer
TiredTumblrina
Shaun_Sheep
Sebastian Poeplau
Hendrik Wolff
Chris Pyles
Marty
Poliorcetics
Mark Stosberg
Blaž Hrastnik
Szabin
François Laignel
Hichem
Kitsu
woojiq
Simran Kedia
Sean Perry
ath3
Matthew Bourke
Pascal Kuthe
Skyler Hawthorne
Evgeniy Tatarkin
Diego
TornaxO7
Harishankar G
Tshepang Mbambo
woojiq
Jonathan LEI
Daniel S Poulin
Gokul Soumya
Quentin
Jaakko Paju
Kirawi
Tobias Hunger
Cyrill Schenkel
Luis Useche
mo8it
Dan Cardamore
Emi
Markus F.X.J. Oberhumer
Mike Trinkala
Mo
Gabriel Dinner-David
nkitsaini
AlexanderDickie
Mehdi Abedi
Mihir Gadgil
kyfanc
Galen Abell
Waleed Dahshan
Nick
Daniel Sedlak
Matouš Dzivjak
Ben Dennis
jw013
Sammo98
Philipp Mildenberger
Daniel Ebert
Hendrik Norkowski
chtenb
Cole Helbling
Bjorn Ove Hay Andersen
Ryan Mehri
Yomain
Ryan Mehri
Paul Olteanu
Lorenzo Bellina
Lloyd Bond